hi all, i have problem with this usb stick.
the lsusb says
Bus 001 Device 002: ID 048d:9006
installed the it9135
root@dm800se:~# opkg install enigma2-plugin-drivers-dvb-usb-it913x
enigma2-plugin-drivers-dvb-usb-it913x: unsatisfied recommendation for kernel-module-it913x
Installing firmware-dvb-usb-af9035-01 (1.1+git292+25f936b) on root.
Downloading http://openplifeed.is-gone.com/feeds/openpli-6.1/all/firmware-dvb-usb-af9035-01_1.1+git292+25f936b-r0_all.ipk.
Installing firmware-dvb-usb-af9035-02 (1.1+git292+25f936b) on root.
Downloading http://openplifeed.is-gone.com/feeds/openpli-6.1/all/firmware-dvb-usb-af9035-02_1.1+git292+25f936b-r0_all.ipk.
Installing firmware-dvb-usb-it913x (1.1+git292+25f936b) on root.
Downloading http://openplifeed.is-gone.com/feeds/openpli-6.1/all/firmware-dvb-usb-it913x_1.1+git292+25f936b-r0_all.ipk.
Installing kernel-module-af9033-3.2-dm800se (3.2) on root.
Downloading http://openplifeed.is-gone.com/feeds/openpli-6.1/dm800se/kernel-module-af9033-3.2-dm800se_3.2-r14.19.52_dm800se.ipk.
Installing kernel-module-rc-core-3.2-dm800se (3.2) on root.
Downloading http://openplifeed.is-gone.com/feeds/openpli-6.1/dm800se/kernel-module-rc-core-3.2-dm800se_3.2-r14.19.52_dm800se.ipk.
Installing kernel-module-dvb-usb-3.2-dm800se (3.2) on root.
Downloading http://openplifeed.is-gone.com/feeds/openpli-6.1/dm800se/kernel-module-dvb-usb-3.2-dm800se_3.2-r14.19.52_dm800se.ipk.
Installing kernel-module-mxl5007t-3.2-dm800se (3.2) on root.
Downloading http://openplifeed.is-gone.com/feeds/openpli-6.1/dm800se/kernel-module-mxl5007t-3.2-dm800se_3.2-r14.19.52_dm800se.ipk.
Installing kernel-module-tda18218-3.2-dm800se (3.2) on root.
Downloading http://openplifeed.is-gone.com/feeds/openpli-6.1/dm800se/kernel-module-tda18218-3.2-dm800se_3.2-r14.19.52_dm800se.ipk.
Installing kernel-module-tua9001-3.2-dm800se (3.2) on root.
Downloading http://openplifeed.is-gone.com/feeds/openpli-6.1/dm800se/kernel-module-tua9001-3.2-dm800se_3.2-r14.19.52_dm800se.ipk.
Installing kernel-module-dvb-usb-af9035-3.2-dm800se (3.2) on root.
Installing kernel-module-it913x-fe-3.2-dm800se (3.2) on root.
Installing kernel-module-dvb-usb-it913x-3.2-dm800se (3.2) on root.
Installing enigma2-plugin-drivers-dvb-usb-it913x (1.2) on root.
Downloading http://openplifeed.is-gone.com/feeds/openpli-6.1/all/enigma2-plugin-drivers-dvb-usb-it913x_1.2-r0_all.ipk.
Configuring kernel-module-tua9001-3.2-dm800se.
Configuring kernel-module-rc-core-3.2-dm800se.
Configuring firmware-dvb-usb-af9035-01.
Configuring firmware-dvb-usb-af9035-02.
Configuring firmware-dvb-usb-it913x.
Configuring kernel-module-af9033-3.2-dm800se.
Configuring kernel-module-dvb-usb-3.2-dm800se.
Configuring kernel-module-mxl5007t-3.2-dm800se.
Configuring kernel-module-tda18218-3.2-dm800se.
Configuring kernel-module-dvb-usb-af9035-3.2-dm800se.
Configuring kernel-module-it913x-fe-3.2-dm800se.
Configuring kernel-module-dvb-usb-it913x-3.2-dm800se.
Configuring enigma2-plugin-drivers-dvb-usb-it913x.
then reboot and the dmesg says
[ 43.523000] it913x: Chip Version=02 Chip Type=9135
[ 43.526000] it913x: Dual mode=0 Remote=1 Tuner Type=0
[ 43.526000] it913x: Unknown tuner ID applying default 0x60
[ 43.530000] dvb-usb: found a 'ITE 9135(9006) Generic' in cold state, will try to load a firmware
[ 43.709000] dvb-usb: downloading firmware from file 'dvb-usb-it9135-02.fw'
[ 43.710000] it913x: FRM Starting Firmware Download
[ 43.943000] it913x: FRM Firmware Download Completed - Resetting Device
[ 43.975000] it913x: Chip Version=02 Chip Type=9135
[ 43.976000] it913x: Firmware Version 52953344
[ 44.038000] dvb-usb: found a 'ITE 9135(9006) Generic' in warm state.
[ 44.041000] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 44.061000] DVB: registering new adapter (ITE 9135(9006) Generic)
[ 44.078000] it913x-fe: ADF table value :00
[ 44.083000] it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 01
[ 44.135000] it913x-fe: Tuner LNA type :60
[ 44.388000] DVB: registering adapter 1 frontend 0 (ITE 9135(9006) Generic_1)...
[ 44.390000] dvb-usb: ITE 9135(9006) Generic successfully initialized and connected.
[ 44.391000] it913x: DEV registering device driver
[ 44.393000] it913x: Chip Version=02 Chip Type=9135
[ 44.398000] it913x: Firmware Version 52953344
[ 44.400000] it913x: Dual mode=0 Remote=1 Tuner Type=0
[ 44.400000] it913x: Unknown tuner ID applying default 0x60
[ 44.401000] dvb-usb: found a 'ITE 9135(9006) Generic' in warm state.
[ 44.411000] dvb-usb: will pass the complete MPEG2 transport stream to the software demuxer.
[ 44.432000] DVB: registering new adapter (ITE 9135(9006) Generic)
[ 44.449000] it913x-fe: ADF table value :00
[ 44.462000] it913x-fe: Crystal Frequency :12000000 Adc Frequency :20250000 ADC X2: 01
[ 44.506000] it913x-fe: Tuner LNA type :60
[ 44.646000] DVB: registering adapter 2 frontend 0 (ITE 9135(9006) Generic_1)...
[ 44.648000] dvb-usb: ITE 9135(9006) Generic successfully initialized and connected.
[ 44.649000] it913x: DEV registering device driver
[ 44.653000] usbcore: registered new interface driver it913x
i can see 2 dvb-t tuners in service searching but after that found 0 channels.
thanks in advance.